Powermatic Jointer Certification
From Claremont MakerSpace
This is the approved revision of this page, as well as being the most recent.
| Powermatic Jointer Certification | |
|---|---|
| Version | 0.1.0 |
| Approval Date | 2020-11-03 |
| Prerequisites | |
| Document/Printout | Powermatic Jointer Certification |
| Required For Tools/Shops | |
| Student: | |
|---|---|
| Trainer: | |
| Date: | |
| Version: | 0.1.0 - 2020-11-03 |
Certification required for: Jointer (Wood Shop)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy
- Parts of the jointer are properly identified
Pre-Operation
- Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.
- Stock is checked for issues/problems
- Supports or trained assistants are available to help with outfeed if necessary
- Proper push aids are selected
Operation
- Dust collector is used properly
- Proper body position
- Infeed table is adjusted properly
- Fence depth is set properly
- Material is fed properly
- Adjust infeed table and fence
Post-Operation
- Work area is cleaned
Lockout/Tagout Procedure
- Tool unplugged and plug wrapped in safe/visible location, barrel covers and locks, tag filled out and posted, front desk notified.
| Pass/Fail: |
|---|
| Comments: |
|---|
| Student Signature: | Date | ||
|---|---|---|---|
| Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).
